All the parts are now primed, riveting will be next

No pictures today, I managed to get the skins deburred and dimpled.

Next step for the fuselage, was to deburr and dimple all the parts. I managed to deburr and dimple the bulkheads and all the small parts. I also deburred the inside of the skins. I the removed the blue plastic from the exterior, I still have to deburr this side and dimple the skins.

Today I installed and drilled the upper skins. Two stiffeners and one rib are also installed. Here the forward part of these parts shown on the picture.

As the weather allows some priming, today session was all about just that. First some deburring, some sanding, degreasing and then the priming. Despite having prepared only a small batch of paint, I had some left over after all the parts were done, so I primed parts that were not yet drilled, I'll use the aerograph to touch them up.