Assembling small parts

Publié 13-12-2007 18:02:47
Auteur pg
I had to work on the parts that got primed yesterday. First I riveted all the nutplates and then riveted the parts together where it was possible.



Then I reassembled the aileron trim, I'll install it in the fuselage later.



And I finished by priming the interior of the elevator control rods. I used Van's method, capping one end, pouring some primer, capping the second end and shaking the rod. To have the primer dry I took the rods into the house.
Working time on this subpart
Today :  2h (Total : 102h)




Ce blog vient de Notre avion
http://www.notreavion.net

L'URL de ce blog
http://www.notreavion.net/modules/weblog/details.php?blog_id=387