In fact I first begin adjusting the left gear lower intersection fairing. After some cutting and sanding it looks OK.
I also installed the upper intersection fairing, some tweaking oto be done once the wing is installed.
Then I duplicated all the opérations for the right side. This is a picture showing the use of the small plastic tubing , the trailing edge is not aligned correctly as it is not centered between the strings.
Here the right upper intersection fairing. There is a 1/8" gap between the lower skin and the fairing, I will fill it up later in the installtion process.
As usual, once everything is complete all is disassembled again. I begun giving some parts a better finish and enlarging the lower holes for the wheels. One side is still to be done.
Here The right wheel fairing with the two halves of the lower intersection fairing to be epoxied.
All the final préparation of the parts can now be done in small working sessions.
Working time on this subpart
Today : 5h (Total : 45h)
|