Filling

Publié 09-07-2009 19:03:41
Auteur pg
I first rivet the nutplates for the upper nose gear leg fairing.



Then I fill all the small defects I have found on the cowls. I also make a shim with epoxy between the forward support bracket and the part that will close the cowls. I think it's easier this way than fabricating aluminium shims.



I think that after some sanding, the cowls will be ready for priming.
Working time on this subpart
Today :  2h (Total : 132h)




Ce blog vient de Notre avion
http://www.notreavion.net

L'URL de ce blog
http://www.notreavion.net/modules/weblog/details.php?blog_id=676