Today I got some work done, first I cleaned and rearranged the workshop for two hours, my paintbooth is gone, i'll find another solution for the next painting session.
Then I backriveted the stiffeners to the skins. On the picture you can see the riveting tape used to hold the rivets: sticky on the green edges but not at the center over the riveheads.
The I riveted the right aileron, some tricky rivets to set alone on the upper part of the spar. I got some dings after slipping with the rivet gun, but they'll get smoothed out before paint.
Working time on this subpart
Today : 6h (Total : 23h)
|