Building log

22-May-2006
Skeleton assembly ... almost
Catégorie: Empennage : Rudder

Today some work on the rudder, first I drilled an aluminium angle to try to fazabricate a straight trailing edge. The I had to file the stiffeners as they were to high by the trailing edge and lastly I had to re-countersink the trailing edge angle as the dimples weren't sitting correctly.
I then primed everything (or I thought so), before beginning the assembly of the skeleton.
I got stopped by the fact I forgot to prime the counterbalance skin. I think I'll first prepare the elevator's stiffeners before the next priming session.




Working time on this subpart
Today :  5h (Total : 19h)

Lectures (2903)
Précédent | Suivant
Page optimisée pour l'impression Envoyer ce blog à un ami