Building log

16-Oct-2011
Fuel gauge calibration
Catégorie: Assembly

No pictures today, some work was done but no real progress.
I began by cutting the wing root fairings. Trying to get the gap the smallest possible, I iterated which is tedious. I will finish next time.
I the calibrated the fuel gauges by transfering the fuel to the right tank. I did not see a leak for the time being.
I also trid, without success, to calibrate the right magnetometer. I know the wiring is correct, may be there is a problem with one of the connectors.


Working time on this subpart
Today :  4h (Total : 99h)

Lectures (3075)
Précédent | Suivant
Page optimisée pour l'impression Envoyer ce blog à un ami