Building log

31-Aug-2006
Riveting
Catégorie: Wings : Rear spar

Assembly and riveting of the rear spar. I had to drill out some rivets as I had forgotten to dimple the reinforcing plate's flange. 11 rivets to drill out per spar, it's only time.



On the picture, some rivets are missing on the reinforcing plates. It's normal the holes will be used to rivet the ribs.

Working time on this subpart
Today :  2h (Total : 5h)

Lectures (2229)
Précédent | Suivant
Page optimisée pour l'impression Envoyer ce blog à un ami