Building log |
16-Feb-2007
Riveting
|
Today, I begun assembling the main bulkhead. I first assemble the control column supports and the control column. I needed too long a time to find out how to arrange the washers to have free play of the controls. Once all was solved, I couldn't resist putting my wooden grips on the sticks. Then I decided to apply the latest Service Bulletin from Vans. The right seat stick has to bolted permanently on rather than being left removable. It's only a hole to drill, a bolt, a washer and nut to install. The I riveted the aft part of the bulkhead, to align everything I use the spar bolts. Working time on this subpart Today : 3h (Total : 37h) |
Lectures (2345)