Building log

Crotch strap
Catégorie: Fuselage : Center part

A big working day at home, but only one hour in the workshop. I decided to begin tackling the crotch strap support. As I bought Hooker harnesses, there are a few alterations to be made. First the floor hole needs to be enlarged to allow for the buckle to pass through.

Then the bolting point needs to be displaced as the buckle would hit the support if the Vans location would be used. In the picture, the upper mark is the suggested location, the lower mark is where we will attach the strap.

Working time on this subpart
Today :  1h (Total : 12h)

Lectures (2292)
Précédent | Suivant
Page optimisée pour l'impression Envoyer ce blog à un ami