After the session today, it seems nothing has changed from yesterday. A lot of the work today was assembling and disassembling the parts and tweaking all the little problems. First the rear frame and siderails had to be adjusted.



On the picture, the junction between the siderail and the forward frame that needed some tweaking.



After all was done, I installed the splice plate between the siderail and the forward frame. The holes on the forward frame will be enlarged a little later, this will allow for some small adjustments if needed.



The forward frame making an angle with the siderail, a small wedge has to be installed. On the picture it is not yet at it's correct position, I'll do it later.