Building log |
10-Sep-2011
Fuel lines
Catégorie: Assembly
|
Before working on the fuel lines I connected the ruuder cables to the pedals. It looks easy, two bolts, two small steel strips, a few washers, a nut and a safety pin. But visibility is scarce and installing the safaty pins is a challenge. This is the fuel line on the left side. I first made the 90° angle out of tubing as going with the braided line was not possible due to a too small radius. I also connected the right fuel tank, this is mich easier as the connection is straight. Working time on this subpart Today : 4h (Total : 68h) |
Lectures (2549)