Today, I begun by riveting the parts I had prepared yesterday.



fr]Ensuite, premier montage du guignol de commande pour l'aileron. La montage est provisoire, les boulons ne sont pas positionnés correctement et sur une des ailes le guignol sera muni d'une servocommande pour le pilote automatique.[/fr]The I installed the aileron bellcrank, nothing is torqued as the bolts are in the wrong way and one of the bellcrank will be equipped with an autopilot servo.



The I reclecoed the inboard lower skin, the riveting will take place later as the wing has first to be inspected. Tomorrow I'll built the wing storing cradle.