Building log |
22-May-2006
Skeleton assembly ... almost
|
Today some work on the rudder, first I drilled an aluminium angle to try to fazabricate a straight trailing edge. The I had to file the stiffeners as they were to high by the trailing edge and lastly I had to re-countersink the trailing edge angle as the dimples weren't sitting correctly. I then primed everything (or I thought so), before beginning the assembly of the skeleton. I got stopped by the fact I forgot to prime the counterbalance skin. I think I'll first prepare the elevator's stiffeners before the next priming session. Working time on this subpart Today : 5h (Total : 19h) |
Lectures (3788)