Je me suis aperçu que les vis de fixation du hublot arrière était un peu courte. Sur la photo, la vis au premier plan est assez longue, elle dépasse du boulon les autres sont trop courtes.
Je les ai toutes remplacées.




J'ai également fais un petit joint en mastic à  réservoir pour pour éviter que l'eau ne pénètre.

As I had some help, we installed the window. After some tweaking it's screwed on the fuselage.
I still have to find how to make a nice seal at the aft as water is supposed to leak in when flying or parking in rain.

After a fine sanding, I apply the last layer of primer on the forward fairing.
I then remove all the masking tape, some one year old. After some cleaning I'm pretty happy with the result. There is one small scratch to repair on the plexiglas, it will be done once the plane assembled.

After a light sanding, I applied some primer on the forward fairing. The result looks quite good, only a handfull of very small problems.
I also filled the small holes on all the other fiberglass parts.

I sanded the front fairing and filled a fex very small pinholes. As soon as the weather improves, I will spray some primer.