Building log - Articles les plus récents

Tout : Wings : Leading edge
« 1 2 (3) 4 »


06-Nov-2006
Catégorie: Wings : Leading edge

Today we finished riveting the right leading edge. I say we, because for the first time Sabine was holding the gun. She did a great job, not one rivet to drill out.
Working time on this subpart
Today :  1h (Total : 20h)

Lectures (2081)
03-Nov-2006
Catégorie: Wings : Leading edge

While waiting for the proseal to cure, I begun riveting the leading edges. I managed to finish the upper skin on one side.




Working time on this subpart
Today :  1h (Total : 19h)

Lectures (2027)
09-Oct-2006
Catégorie: Wings : Leading edge

After having riveted all the nutplates to the junction plates between leading edge and fuel tank Sabine gave me a hand to reassemble the leading edges. They will get riveted pending the other small works that have priority (priming the skins being the topmost).



Here, the junction plate clecoed to the leading edge.




Working time on this subpart
Today :  1h (Total : 18h)

Lectures (2067)
28-Sep-2006
Catégorie: Wings : Leading edge

Today the weather was fine so I primed the leading edge parts. On the first picture one of the skins and on the second the ribs are drying hanging on my workshop's door.
I finished some left over primer by using it to touch up small parts of the skeleton.







Working time on this subpart
Today :  4h (Total : 17h)

Lectures (1992)
27-Sep-2006
Catégorie: Wings : Leading edge

All the parts are now dimpled, for the skins Sabine gave a hand as their size and shape makes them somewhat difficult to keep in position.
Working time on this subpart
Today :  2h (Total : 13h)

Lectures (1874)

« 1 2 (3) 4 »