After a fine sanding, I apply the last layer of primer on the forward fairing.
I then remove all the masking tape, some one year old. After some cleaning I'm pretty happy with the result. There is one small scratch to repair on the plexiglas, it will be done once the plane assembled.

After a light sanding, I applied some primer on the forward fairing. The result looks quite good, only a handfull of very small problems.
I also filled the small holes on all the other fiberglass parts.

I sanded the front fairing and filled a fex very small pinholes. As soon as the weather improves, I will spray some primer.

The forward fairing had to be redone after the small problems I had during canopy fitting last week.
After some sanding,a new layer of epoxy was applied.

I first sand a bit more aof the rear of the canopy. Then I sand all the edges from the canopy and the window.
I file away a small amount of skin in the front as it always snaps with the fuselage skin. The gap will be larger but I will work on this after final assembly.