Today the weather was fine so I primed the leading edge parts. On the first picture one of the skins and on the second the ribs are drying hanging on my workshop's door.
I finished some left over primer by using it to touch up small parts of the skeleton.

All the parts are now dimpled, for the skins Sabine gave a hand as their size and shape makes them somewhat difficult to keep in position.

Well, all the skins except some minor details are now deburred. Next they'll get dimpled.

Today, I disassembled the leading edges, deburred the skins and ribs. Next I drilled, deburred and dimpled the splice plate. The splice plate qill be riveted to the leading edge (the row of holes), and nuplates will be riveted to the other row of holes to allow the use of screws to attach the fuel tank.

Today all I had assembled yesterday has been disassembled again : no more fuel tanks or Z-brackets on the spar. Then I reinstalled the leading edges and drilled them. The next weeks I'll deburr and dimple the leading edges and the skins to be able to prime everything if we have a sunny day or two before it's getting to cold.